LED Lights For Bus Station Lighting
LED Lights For Bus Station Lighting and industrial site lighting
In bus station lighting, there are many vehicles and people. LED lights are usually designed with high brightness and high color rendering to ensure that passengers and drivers can clearly see their surroundings. In addition, bus station lighting LED lights also need to consider energy saving and environmental protection to reduce energy consumption and maintenance costs. If these lamps are installed outdoors, we also need waterproofing, dustproofing and other issues so that the lamps can adapt to the complex outdoor environment.
For loading and unloading areas in industrial sites, there are also many vehicles and people. The high brightness and high color rendering of LED lights help improve work efficiency and safety. A clear and uniform lighting environment can help personnel quickly and accurately identify objects and surrounding environments, reducing the possibility of misoperation and accidents. In addition, such areas generally do not need to be turned on during non-working hours, so it is sometimes necessary to appropriately lower the brightness or turn off the lamps. At this time, microwaves, intelligent controls, etc. are sometimes used in lighting applications in such areas.
Lighting Standards for Bus Station and loading bay
By checking the EN12464-1 standard, we found no relevant lighting standards for Bus stations, so in actual projects, the specific requirements of the project shall prevail. Or the parking area should refer to the parking lot lighting, and the platform area should refer to the standards related to indoor lighting. The following are standards related to industrial site lighting.
Ref. no. |
Type of area, task or activity |
Em |
Uo |
RGL |
Ra |
Specific requirements |
1 |
Short-term handling of large units and raw materials, loading and unloading of solid bulk goods |
20 |
25 |
55 |
20 |
|
2 |
Continuous handling of large units and raw materials, loading and unloading of freight, lifting and descending location for cranes, open loading platforms |
50 |
40 |
50 |
20 |
|
3 |
Reading of addresses, covered loading platforms, use of tools, ordinary reinforcement and casting tasks in concrete plants |
100 |
50 |
45 |
20 |
|
4 |
Demanding electrical, machine and piping installations, inspection |
200 |
50 |
45 |
60 |
Use local lighting |
ZGSM solutions
The structures of bus stations vary greatly, including those that are purely outdoor, those that are purely indoors, and those that are semi-indoor and semi-outdoor. If your bus station needs lighting, it is best to provide CAD drawings and we will design the corresponding lighting for you. The following is one of our bus station lighting cases in South America. The project uses ZGSM floodlights, equipped with its asymmetric spectrum to ensure that the illumination and uniformity meet the customer’s needs.
For loading and unloading areas in industrial sites, you need to tell us the area that needs to be illuminated, the installation height of the lamps, and the spacing of the lamps, etc., and we will recommend corresponding alternatives for you. If your project requires new lighting fixtures, we can recommend corresponding solutions for you, including recommended installation heights, fixture spacing, dimming, wattage and lenses, etc. Please contact us for more information.
